Specifications

·  Base lift weight is 106 lbs.

·  Scooter weight must not exceed 325 lbs.

·  Scooter width must not exceed 27".

·  Maximum hitch to ground distance 20".

Assembly

·  All steel construction, using only the finest materials.

·  Painted in our factory with a gray Hammertone powder coating.

·  Parts are baked at 400 degrees for 30 minutes providing a hard protective coating.

Motor

·  Fully sealed industrial rated 12 volt DC motor.

·  12 volt on-board battery pack (110 volt charger included).

·  Steel gears with a 35:1 ratio.

·  5.5 amp draw under 325 lbs load.

·  Ball screw actuator static tested at 2500 lbs.

·  Manual override hand crank.

Platform

·  Rails are made from 1/8" brushed aluminum.

·  Easily washes to maintain the new look.

·  Automatic lockdown arm for securing the scooter to the lift.

·  1 year warranty on parts only.

·  5 year warranty on motor.

·  Take the lift to a dealer every three to five weeks for routine maintenance.

Specifications

·  Base lift weight is 112 lbs.

·  Scooter weight must not exceed 325 lbs.

·  Scooter width must not exceed 27".

·  Maximum hitch to ground distance 20".

Assembly

·  All steel construction, using only the finest materials.

·  Painted in our factory with a gray Hammertone powder coating.

·  Parts are baked at 400 degrees for 30 minutes providing a hard protective coating.

Motor

·  Fully sealed industrial rated 12 volt DC motor.

·  12 volt on-board battery pack (110 volt charger included).

·  Steel gears with a 35:1 ratio.

·  5.5 amp draw under 325 lbs load.

·  Ball screw actuator static tested at 2500 lbs.

·  Manual override hand crank.

Platform

·  Rails are made from 1/8" brushed aluminum.

·  Easily washes to maintain the new look.

·  Automatic lockdown arm for securing the scooter to the lift.

·  1 year warranty on parts only.

·  5 year warranty on motor.

·  Take the lift to a dealer every three to five weeks for routine maintenance.

Specifications

·  Base lift weight is 116 lbs.

·  Scooter weight must not exceed 325 lbs.

·  Scooter width must not exceed 27".

·  Maximum hitch to ground distance 20".

Assembly

·  All steel construction, using only the finest materials.

·  Painted in our factory with a gray Hammertone powder coating.

·  Parts are baked at 400 degrees for 30 minutes providing a hard protective coating.

Motor

·  Fully sealed industrial rated 12 volt DC motor.

·  12 volt on-board battery pack (110 volt charger included).

·  Steel gears with a 35:1 ratio.

·  5.5 amp draw under 325 lbs load.

·  Ball screw actuator static tested at 2500 lbs.

·  Manual override hand crank.

Platform

·  Rails are made from 1/8" brushed aluminum.

·  Easily washes to maintain the new look.

·  Automatic lockdown arm for securing the scooter to the lift.

·  1 year warranty on parts only.

·  5 year warranty on motor.

·  Take the lift to a dealer every three to five weeks for routine maintenance.